24/7 Emergency Repairs

For immediate assistance

call: 0161 210 5153

Fast Acting Insulated Roller Shutter
(The One Door)

The shutter curtain is constructed from 90mm or 100mm twin interlocking cold rolled galvanized steel laths, in-filled with CFC free insulation. Each lath is retained by nylon end locks fixed and secured by steel rivets. The bottom lath incorporates a rubber seal.

Features

  • Headseal - 100mm or 150mm nylon brush strip is supplied to fix to the underside of the lintel to form a seal between the lintel and the shutter curtain.
  • Side Guides & Angles - Specially designed galvanized guide section incorporating twin vertical brush seals full height to both sides of each guide. Mild steel angles of suitable size and thickness are supplied to support the side guides and to form a secure fixing to the structure.
  • Roller Barrel - Constructed from mild steel tube of suitable outside diameter and wall thickness to suit shutter application. Barrels are fitted in conjunction with an appropriate safety device, i.e. Safedrive motor unit.
  • Roller Bracket Plates - Of suitable design, and ranging from 6 mm to 10 mm thickness. Fitted with suitable cleats for fixing to the structure.
  • Operation - A variety of electric motors are used, depending upon the application. 415 volt 3 phase motors are normally used. A push button station is provided with "UP", "DOWN" and "STOP" buttons.
    Our estimate/quotation should provide the relevant details concerning the electric specification intended to be used for each particular installation, together with the electrical requirements that need to be provided by the customer.
    Additional operating controls such as induction loops, radar, and radio control, plus relevant safety features should be specifically shown within the estimate/quotation.
  • Finish - Side guides, supporting angles and door curtain are galvanized. Non-galvanized sections are primer painted. The shutter curtain is available in a range of plastisol colours. The complete shutter can be powder coated in an extensive range of colours although powder coating is not as durable as plastisol.
  • Coil Castings (Hoods) / Fascias / Motor Covers - Coil casings, fascias and motor covers can be supplied at additional cost and are supplied galvanized unless specified otherwise.
  • Windows - Rows of double glazed Perspex windows can be incorporated into the shutter laths at additional cost.
  • Insulation Value - 0.69 W/m2C
  • Acoustic Value - 18 DBA
  • Door Weight - 45kg m2
  • Average Speed - .45 metres per second

Technical Information

Technical drawings of this product are listed below in PDF format. You will need the free Adobe Reader® software to view these files. Get Adobe Reader

To find out about our fast lead times, pricing and any other details contact our dedicated Sales Consultants on 0161 210 5153.